Many people get confused as to why so many I/O modules are needed within a given blade chassis. The basic concept is simple (in most cases) – for each port you need on a given blade server, you need to have a corresponding I/O module. For example, if you need 4 NICs, you’re going to need 4 Ethernet modules (in most cases.) In today’s post, I thought I would keep it simple and publish the I/O diagrams of Cisco, Dell, HP and IBM chassis. Of course, I am human and “have been known to make mistakes – from time to time” so please feel free to correct me on any errors you see. Enjoy.
(Updated 8/3/2011 – fixed Dell M1000e Full Height I/O Diagram)